Yaesu FT-950 (USED)
SKU Part Number: U14656
The FT-950, the newest radio in the direct lineage of the FTDX-9000 and FT-2000 series radios, has been developed to fit the...
Read More
Special Price £799.00 £799.00 Regular Price £849.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
The FT-950, the newest radio in the direct lineage of the FTDX-9000 and FT-2000 series radios, has been developed to fit the needs of both casual and serious DX enthusiasts, as well as new HF licensees eagerly seeking to discover the magic of the HF and 50MHz bands.  Prospective owners will find that this radio comes in an appropriately-sized desktop package that provides them with loads of easily located controls and features to ensure they enjoy all of the excitement available on the 160 through 6 meter Amateur Radio bands.

The product is in good condition, only a few small scratches on the upper part of the body, including user manual, microphone, DC cable and original box.

The FT-950, the newest radio in the direct lineage of the FTDX-9000 and FT-2000 series radios, has been developed to fit the needs of both casual and serious DX enthusiasts, as well as new HF licensees eagerly seeking to discover the magic of the HF and 50MHz bands.  Prospective owners will find that this radio comes in an appropriately-sized desktop package that provides them with loads of easily located controls and features to ensure they enjoy all of the excitement available on the 160 through 6 meter Amateur Radio bands.

The product is in good condition, only a few small scratches on the upper part of the body, including user manual, microphone, DC cable and original box.

SPECIFICATIONS

GENERAL
Type: Amateur HF/VHF transceiver
Frequency range: TX: 10-160 m + WARC / 50-54 MHz
RX: 0.03-56 MHz
Tuning steps: 1 / 10 / 100 Hz
Frequency stability: ±0.5 ppm @ 25°C (77°F), after 1 minute warmup
Mode: AM / FM / NFM / SSB / CW / RTTY / Packet
Channels / memory management: 99 regular
5 QMB
9 scan edge pairs (PMS)
Non-volatile FRAM storage
Repeater shift / offset: ±0-1 MHz in 10 KHz steps (10 m)
±0-4 MHz in 10 KHz steps (6 m)
Power supply: 13.8 VDC ±10%
Current drain / power consumption: RX: 1.8-2.1 A
TX: Max 22 A
Antenna impedance / connector: 50 ohm / Two SO-239 (16.7-150 ohm with ATU on)
Dimensions (W*H*D): 365*115*315 mm (14.37*4.53*12.4")
Weight: 9.8 Kg (21.61 lb)
Other features: 32-bit IF-DSP. Built-in auto-ATU and keyer. 0.5 ppm TCXO. VOX. MOX.
5-channel digital voice recorder. CTCSS/PL. Rotator control function.
RS-232C and CAT control.
   
   
RECEIVER SECTION
Receiver system: Triple conversion superheterodyne
1st IF: 69.45 MHz
2nd IF: 450 KHz
3rd IF: 30 KHz (AM/FM: 24 KHz)
Sensitivity: AM (10 dB S+N/N, 6 KHz BW)
0.5-1.8 MHz: 28 uV (IPO On)
1.8-30 MHz: 2 uV (AMP 2)
50-54 MHz: 1 uV (AMP 2)
FM (12 dB SINAD, 15 KHz BW)
28-30 MHz: 0.5 uV (AMP 2)
50-54 MHz: 0.35 uV (AMP 2)
SSB (10 dB S+N/N, 2.4 KHz BW)
0.5-1.8 MHz: 4 uV (IPO On)
1.8-30 MHz: 0.2 uV (AMP 2)
50-54 MHz: 0.125 uV (AMP 2)
Selectivity: AM: 6 KHz (-6 dB), 15 KHz (-60 dB)
FM: 15 KHz (-6 dB), 25 KHz (-60 dB)
SSB: 2.4 KHz (-6 dB), 3.6 KHz (-60 dB)
CW/RTTY/PKT: 500 Hz (-6 dB), 750 Hz (-60 dB)
Image rejection: 10-160 m: 70 dB
50-54 MHz: 60 dB
AF output power / speaker: 2.5 W at 10% distortion / 4 ohm
External speaker connector: 3.5 mm, 4-8 ohm
   
   
TRANSMITTER SECTION
RF output power:
  HF 6 m
AM: 2-25 W 2-25 W
FM/NFM: 5-100 W 5-100 W
SSB (PEP): 5-100 W 5-100 W
CW: 5-100 W 5-100 W
RTTY/Packet: 5-100 W 5-100 W
Modulation system: AM: Low level (early stage)
FM: Variable reactance
SSB: Balanced
Max FM deviation (Factory set): FM: ±5 KHz
NFM: ±2.5 KHz
Spurious emissions: 10-160 m: Better than -60 dB
50-54 MHz: Better than -65 dB
Microphone impedance / connector: 200 ohm to 10 Kohm (600 ohm nominal) / 8-pin (Metal locking ring connector)
Microphone input level: ? mV

Shipping:

We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.

Returns:

If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:

Click here for returns form

Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request.

Warranty Terms and Conditions

Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.

For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.

International Warranty information

Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]