SPE Expert 2K-FA 2kW Solid-State Fully Automatic Linear Amplifier with ATU
SKU Part Number: 2.0K-FA
SPE Cable Finder Which Control Cable Do I Need? ...
Read More
Special Price £5,499.00 Regular Price £6,175.00
Pre Order
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
SPE Cable Finder

Which Control Cable Do I Need?

Select your transceiver and we'll show the matching ML&S control cable for your SPE Expert amplifier.

Can't find your radio? Try our Cable & Compatibility Finder to find the correct amplifier control cable for your station.
2kW Fully Automatic Solid-State Amplifier

SPE Expert 2K-FA

A high-power 2kW PEP HF and 6m solid-state linear amplifier with built-in automatic antenna tuner, internal PFC power supply, six-way antenna management, SO2R capability and fully automatic transceiver integration.

MAX OUTPUT
Up to 2kW PEP
High-power SSB and CW operation, including 6m.
RF STAGE
6 × MRF151G
Fully solid-state high-power RF architecture.
ATU
Up to 5:1 SWR
Third-series full-power matching on HF, 2.5:1 on 6m.
WEIGHT
Approx. 25kg
Integrated high-power PSU and automatic tuner.
High-Power Expert

2kW with the Power Supply and ATU Built In

The SPE Expert 2K-FA integrates its high-power RF stage, automatic antenna tuner and PFC switching power supply into a single chassis measuring approximately 380 × 183 × 430mm, including connectors.

There is no valve warm-up period. The solid-state amplifier is immediately ready for operation, while two onboard CPUs manage amplifier control, transceiver communication, tuner memories, antenna selection and protection functions.

Six-Device RF Power Stage

Six MRF151G Power MOSFETs

The 2K-FA uses six MRF151G power MOSFETs to produce up to 2kW PEP output. The fully solid-state architecture eliminates valve warm-up and provides electronically controlled power management and protection.

The third-series design also improves heat dissipation and raises the permitted FT8 output to as much as 1.5kW, subject to correct installation and operating conditions.

Three Power Levels

Select the Output to Suit the Station

MAX
Up to 2kW PEP
Maximum output for SSB and CW operation.
MID
1,000W
Intermediate setting for lower-power and continuous-duty operation.
LOW
500W
Reduced output where maximum amplifier power is unnecessary.
Fully Automatic

Change Frequency. The Amplifier Follows.

CAT and band-data integration allows the 2K-FA to follow a compatible transceiver automatically. Frequency changes can trigger the appropriate amplifier band, antenna selection and stored tuner condition without manual intervention.

SPE supports direct integration with Icom, Yaesu, Kenwood, Ten-Tec, FlexRadio and Elecraft, together with suitable configurations for other transceivers.

HF + 6m Coverage

Amateur Bands from 1.8MHz through 6m

The 2K-FA covers the HF amateur bands including WARC allocations and supports 6m operation. The 60m band is supported where permitted by local regulations and licence conditions.

Third-Series Automatic Antenna Tuner

Match up to 5:1 SWR on HF

The current third-series 2K-FA can match antenna SWR of up to 5:1 on HF at full power and up to 2.5:1 on 6m. This is an improvement over earlier 2K-FA specifications.

Stored antenna and tuner conditions can be changed in approximately 10ms. The ATU can be bypassed where required, with SPE specifying maximum attenuation of 0.8dB.

6 ANTENNAS
Automatic Switching
Six SO-239 antenna outputs can be programmed and selected automatically.
3 PER BAND
Flexible Antenna Choice
Up to three antennas can be configured for a single amateur band.
SO2R
Two RF Inputs
Two SO-239 transceiver inputs support Single Operator Two Radio configurations.
TUNABLE ANTENNAS
SteppIR / Ultrabeam
Compatible dynamically tuned antenna systems can be managed by the amplifier.
High Power Gain

Up to 14.5dB Gain

The 2K-FA provides up to 14.5dB power gain. With the ALC connection correctly configured, the amplifier can control the required transceiver drive while operating.

When returned to STANDBY, the transceiver can automatically return to its normal output-power setting.

Clean RF Output

Designed for Low Distortion

SPE specifies spurious emissions below -60dB, improving to -65dB on 50MHz, with third-order distortion of approximately -36dB typical in a two-tone test.

The amplifier presents a nominal 50-ohm input to the transceiver, with input SWR specified at better than 1.2:1.

Duty Cycle Management

Built for High-Power SSB, CW and Digital Operation

In MAX mode, SPE specifies unlimited SSB and CW operation under the stated operating conditions. The third-series amplifier also supports up to 1.5kW on FT8.

If a continuous carrier is transmitted in MAX for more than approximately 15 seconds, the amplifier automatically limits output to approximately 1.5kW. MID and LOW modes support unlimited RTTY operation.

Dual-Layer Protection

Hardware Speed. Software Accuracy.

The 2K-FA continuously monitors heatsink temperature, PA voltage and current, SWR, reflected power, tuner RF voltage, input drive and power-stage balance.

Protection is implemented independently through fast hardware circuitry and software supervision. SPE also controls transmit-relay timing so changeover takes place with zero current at the contacts.

QSK
Full Break-In
Supports full break-in operation for fast CW transmit and receive switching.
COOLING
Variable Fan Control
Heatsink fans are speed controlled, with PSU fan speed reduced during reception.
DISPLAY
Detailed LCD
View PEP output, voltage, current, temperatures, SWR, input, CAT status, band and alarm history.
High-Power Internal PSU

190-255V AC with PFC

The built-in switching power supply operates continuously from 190 to 255V AC, 47-63Hz and incorporates Power Factor Correction. Unlike the smaller Taurus amplifiers, the 2K-FA is not specified for operation from 100-120V mains.

REMOTE CONTROL
USB / RS232
The amplifier supports PC-based remote control and service communication through its rear-panel interfaces.
NETWORK OPTION
SPE LAN-UNIT
Compatible 2K-FA units can use the optional SPE LAN-UNIT for Ethernet, Wi-Fi and Bluetooth remote-control integration.
REMOTE POWER
Exciter-Controlled ON/OFF
With a suitable control connection, amplifier power can follow the connected transceiver.
Transportable High Power

Carry Bag Included

At approximately 25kg the 2K-FA is substantially heavier than the Taurus models, but remains transportable for contest, Field Day and DXpedition use. SPE supplies a sturdy carrying bag with the amplifier.

Documentation

Expert 2K-FA Rev. 3.0 User Manual

Read the full SPE installation, mains-supply, antenna, CAT-interface, tuner, protection and operating instructions before commissioning the amplifier.

View User Manual
Technical Specification

SPE Expert 2K-FA

Fully automatic 2kW PEP HF and 6m solid-state linear amplifier with six-MOSFET RF stage, internal switching power supply, automatic antenna tuner and six-way antenna management.

Amplifier Type Fully automatic solid-state linear amplifier
RF Power Stage 6 × MRF151G power MOSFETs
Frequency Coverage HF and 6m amateur bands, including WARC bands and 60m where permitted
Maximum Output Up to 2kW PEP SSB/CW
FT8 Output Up to 1.5kW, third-series specification
Power Levels MAX up to 2kW / MID 1kW / LOW 500W
Maximum Power Gain Up to 14.5dB
Input Impedance 50 ohms
Input SWR Better than 1.2:1
RF Inputs 2 × SO-239
Antenna Outputs 6 × SO-239
Antennas per Band Up to 3
SO2R Supported
QSK Full break-in supported
Spurious Emissions Less than -60dB, approximately -65dB on 50MHz
Third-Order Distortion Approximately -36dB typical, two-tone test

Automatic Antenna Tuner

HF Matching Range Up to 5:1 SWR at full power, third-series specification
6m Matching Range Up to 2.5:1 SWR
Antenna Outputs 6 programmable SO-239 outputs
Antennas per Band Up to 3
Switching Time Approx. 10ms for band, antenna and tuning-condition changes
Maximum Attenuation 0.8dB
ATU Bypass Supported
MAX Duty SSB/CW unlimited under specified operating conditions
Continuous Carrier Protection MAX automatically limited to approximately 1.5kW after more than 15 seconds of continuous transmission
MID / LOW RTTY Unlimited, subject to normal operating conditions
Cooling Temperature-managed variable-speed forced-air cooling
Power Supply Internal switching PSU with Power Factor Correction
Mains Input 190-255V AC, 47-63Hz
Control Interfaces CAT, band data, ALC, relay/PTT, USB and RS232
Transceiver Support Icom, Yaesu, Kenwood, Ten-Tec, FlexRadio, Elecraft and compatible equipment
Tunable Antenna Support SteppIR and Ultrabeam
Protection Monitoring Temperature, PA voltage, PA current, SWR, reflected power, tuner RF voltage, input power and power-stage balance
Protection Architecture Independent hardware and software protection systems
Remote Control USB / RS232; optional LAN-UNIT supported on compatible firmware
Dimensions Approx. 380 × 183 × 430mm, connectors included
Approx. Weight 25kg
Included Accessories Carry bag, 2 × RCA ALC/relay cables, USB cable, DB connectors, spare fuses, air filter and documentation
Certifications CE, FCC, RCM (C-Tick)

Manufacturer Documentation

Refer to the current Rev. 3.0 SPE manual for complete mains, earthing, CAT configuration, antenna programming, tuner, protection and operating instructions.

View SPE User Manual

Delivery Information

Shipping & Delivery

We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.

All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.

Same-Day Despatch

UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.

Weekend Delivery

Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.

Delivery Service Availability

Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.

Returns Information

Returns & Cancellations

To arrange a return, please contact our team at [email protected] or call 0345 2300 599.

Download Returns Form

Changed Your Mind?

Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.

Cancellation Period

14 Days

Notify us of your cancellation within 14 days of receiving your goods.

Once you have notified us, you have a further 14 days to return the goods.

Condition of Returned Goods

Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.

You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.

Important Conditions

Returns Exceptions

The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.

Modified Equipment & Reversal Charges

Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.

ML&S may charge a reasonable fee to reverse physical modifications and restore equipment to its original factory specification. Any applicable charge will be agreed in advance and deducted from your refund.

Custom-Made Cable Assemblies

Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.

Software & Labour Charges

Customer-requested labour and modification charges are non-refundable once the work has been completed.

Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.

Postage Options

Return Postage Charges

Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.

Standard Parcels

Royal Mail Return Label

£5.95

Per parcel

Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.

Larger Parcels

DPD Return Label

£7.95

Per parcel

Suitable for larger or heavier parcels, including shipments containing batteries.

Collection Service

DPD Collection

£25.00

Per parcel

Available upon request for eligible addresses, subject to service availability.

Return Postage Information

All prepaid return charges will be confirmed before booking and deducted from your refund.

The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.

Faulty or Incorrectly Supplied Goods

Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.

DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.

Refund Information

Refunds

How Refunds Are Processed

Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.

Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.

Product Support

Warranty Terms & Conditions

ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.

New Equipment

Minimum 2-Year Warranty

All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.

Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.

Used Equipment

3-Month Warranty

All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.

Warranty Repairs & Exclusions

Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.

Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.

All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.

Overseas Customers

International Returns & Warranty

Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.

International Return Conditions

International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.

ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.

We're Here to Help

Need Help With a Return?

Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.

Email ML&S

Alternatively, call us on 0345 2300 599.

Nothing in these terms excludes or limits your statutory consumer rights.