FlexRadio Aurora AU-510 500W HF SDR (No Screen)
SKU Part Number: FLEX-AU-510
FLEXRADIO AURORA SERIES Aurora AU-510 500W HF/6m Software-Defined Transceiver – Without Screen An entirely new approach to...
Read More
£6,199.00
Pre Order
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
FLEXRADIO AURORA SERIES

Aurora AU-510

500W HF/6m Software-Defined Transceiver – Without Screen

An entirely new approach to high-power amateur radio. The FlexRadio Aurora AU-510 combines a 500W HF transmitter, direct-sampling SDR receiver, automatic antenna tuner and AC power supply into one compact system, designed for seamless SmartSDR computer and remote operation.

500W HF / 200W 6m Single SCU 2 Slice Receivers Built-in ATU + PSU SmartSDR
PURPOSE-BUILT FOR SOFTWARE CONTROL

Everything You Need. No Unnecessary Screen.

The AU-510 is the screenless model in the Aurora family. It delivers the same 500W HF power and integrated high-efficiency transmitter technology as its screen-equipped equivalent, but operates through compatible SmartSDR software or an optional external Maestro controller. An ideal choice for computer-based shacks, dedicated SDR stations and remote installations.

HIGH-POWER SDR, REIMAGINED

The complete 500W HF station, in one chassis

The FlexRadio Aurora AU-510 fundamentally changes the way a high-power HF station can be assembled. Rather than relying on a separate SDR transceiver, linear amplifier, automatic antenna tuner and high-current DC power supply, Aurora integrates these components into one factory-engineered platform.

Its innovative polar-modulation transmitter delivers up to 500W PEP on supported HF bands and 200W PEP on 50MHz, while the 16-bit direct-sampling receiver and SmartSDR ecosystem provide flexible operating capabilities for DX, contesting, digital modes and remote operation.

The AU-510 features a single Spectral Capture Unit (SCU) supporting two independently configurable slice receivers. For operators who prefer controlling their radio from a computer or external Maestro, it provides an exceptionally capable high-power SDR without the expense of an integrated touchscreen.

500W

HF PEP Output

Adjustable 1–500W PEP on supported 160m–10m amateur bands.

200W

50MHz Output

Up to 200W PEP on 6m, subject to operating mode and limitations.

2

Slice Receivers

Two independent frequency and mode configurations within one SCU.

3:1

Internal ATU

Integrated high-power automatic antenna matching.

REVOLUTIONARY TRANSMITTER ARCHITECTURE

Polar modulation makes high power more efficient

Aurora uses polar modulation rather than a conventional linear RF amplifier. The system separates a transmitted signal's amplitude and phase information and processes these components through high-efficiency switching amplification with sophisticated digital control.

With approximately 80% nominal transmitter efficiency, Aurora converts substantially more electrical energy into useful RF output instead of heat. This is a major reason why a complete 500W station can fit in a chassis comparable in size to many lower-power transceivers.

80%

Nominal Efficiency

Less power is wasted as heat compared with many traditional amplifier systems.

675W

Specified AC Consumption

Manufacturer's published transmit power-input figure under stated conditions.

One

Integrated Station

No separate high-power amplifier, automatic tuner or DC supply required.

Actual efficiency and power consumption depend on operating mode, RF output and duty cycle.

DIRECT-SAMPLING RECEIVER ARCHITECTURE

Two receivers from one powerful SCU

The AU-510's single Spectral Capture Unit uses a high-resolution 16-bit analogue-to-digital converter operating at 122.88 Msps. Its SDR architecture provides two slice receivers, enabling operators to independently configure two frequencies and operating modes within the shared RF capture range.

Third-order amateur-band preselectors and sophisticated digital signal processing help control unwanted signals and deliver strong receiver performance. The AU-510 provides the important tools required for split-frequency DXing, digital-mode operation and general HF listening.

16-bit

ADC Resolution

Direct-sampling digital receiver architecture.

122.88

Msps Sampling

High-speed RF digitisation and SDR processing.

110dB

Specified RMDR

Published AU-510 reciprocal mixing dynamic range figure.

3rd

Order Preselectors

Amateur-band RF filtering before receiver processing.

SOFTWARE-DEFINED FLEXIBILITY

SmartSDR puts the entire station at your fingertips

The AU-510 is designed for operation with FlexRadio's SmartSDR ecosystem, giving users sophisticated receiver controls, panadapters, waterfall displays, transmit settings and audio routing through a compatible control device.

Whether using a dedicated shack computer, compatible external Maestro controller or a supported remote client, the software-defined interface provides substantial flexibility. Operators can configure their display and operating environment to suit everyday DXing, CW, data modes or more specialised station requirements.

SmartSDR

Flexible software control with two slice receivers and two panadapters.

SmartLink

Operate remotely through a suitable internet connection and compatible client.

MultiFlex

Two compatible SmartSDR clients can share access to the transceiver.

DAX Audio and IQ

Two digital audio and two IQ data channels for supported software.

Important: no integrated screen

The AU-510 is supplied without a built-in touchscreen, integrated Maestro front panel or HDMI monitor output. Operation requires a compatible SmartSDR computer, external Maestro controller or other supported client device.

INTEGRATED ANTENNA SYSTEM

500W automatic antenna tuning included

Unlike many SDR transceivers that require an optional tuner, the Aurora AU-510 includes a built-in high-power automatic antenna tuner capable of matching suitable antenna systems within its specified 3:1 SWR range.

The radio also provides two high-power antenna connections, one dedicated receive-only input and a transverter/exciter connection. These allow flexible station configurations without the need for multiple separate transceivers.

Integrated ATU

High-power automatic matching for suitable HF and 6m antenna systems.

Main Antenna Ports

Two connections for the radio's high-power RF antenna system.

RX-Only Input

Connect a separate receiving antenna for compatible operating arrangements.

Transverter Port

Low-level RF drive up to +10dBm for suitable external transverters.

HIGH-STABILITY FREQUENCY REFERENCE

Precision frequency control with integrated GNSS

The AU-510 includes an integrated multi-system GNSS receiver supporting GPS, Galileo, GLONASS, QZSS and SBAS. With suitable satellite reception, the system provides highly accurate frequency reference without the need for repeated manual adjustments.

FlexRadio specifies approximately 0.001ppm GNSS-referenced frequency stability and 0.5ppm with the internal TCXO. A separate high-performance GPSDO option can provide a precision 10MHz reference output for external station equipment.

Optional GPSDO upgrade

The standard GNSS receiver is included. The enhanced GPS-disciplined oscillator and its 10MHz output are optional.

CHOOSING YOUR SCREENLESS AURORA

AU-510 vs AU-520: which is right for you?

Both models are supplied without an integrated screen and share the same maximum RF output, polar-modulation transmitter, automatic antenna tuner, wide-range AC power supply and SmartSDR platform. The AU-520 adds a second independent SCU and additional receiver resources for more demanding operating requirements.

FeatureAU-510AU-520
HF / 6m PEP500W / 200W500W / 200W
Integrated DisplayNoneNone
SCUs12
Slice Receivers24
ADC Sampling Rate122.88 Msps245.76 Msps
Preselectors3rd order7th order
RX-Only Ports12
Transverter Ports12
True DiversityNoYes
Integrated SO2RNoYes
Built-in ATU / PSUBothBoth
THIS MODEL

Choose the AU-510 if...

You want 500W HF power, two slice receivers, an integrated tuner and SmartSDR operation, without paying for an extra SCU or integrated display you may not need.

DUAL-SCU UPGRADE

Choose the AU-520 if...

You need four slice receivers, two independent receiver paths, true diversity, advanced contest band filtering or integrated SO2R, while retaining the same screenless design.

View AU-520 at ML&S →
DIGITAL MODES AND TRANSMITTER PROCESSING

Built for modern digital operation

The AU-510 supports SSB, CW, AM, SAM, FM, RTTY and compatible software-defined digital modes. SmartSDR's DAX audio and IQ interfaces provide convenient connectivity for supported digital-mode applications.

The Aurora platform also provides support for SmartSignal adaptive predistortion and Controlled Envelope SSB (CESSB), with individual feature availability dependent on the installed SmartSDR software and firmware.

High-duty-cycle operating modes

For FT8, RTTY and other high-duty-cycle modes, follow the latest FlexRadio guidance on output power, duty cycle and temperature. A 500W PEP rating does not mean unrestricted continuous-carrier transmission is recommended.

INTEGRATED AC POWER SUPPLY

High-power operation without an external PSU

Aurora's internal supply accepts 80–264V AC at 47–63Hz, eliminating the need for a conventional high-current 13.8V DC power supply. This is particularly convenient for computer-controlled and remote installations, where minimising the number of separate devices simplifies station wiring.

The manufacturer specifies approximately 35W power consumption during reception and 675W during transmission under its stated operating conditions.

AC mains input only

The AU-510 cannot be powered directly from a 13.8V DC station supply or battery. Portable use requires a correctly rated AC supply or inverter.

DESIGNED FOR THE WAY YOU OPERATE

A natural fit for the modern SDR station

Computer-Based Shacks

Operate directly through SmartSDR on your chosen computer display.

Remote Stations

A high-power radio with integrated tuner and PSU for supported SmartLink operation.

HF DX Operating

500W PEP output, effective receiver processing and dual-slice split operation.

DXpeditions

Reduce the weight, cabling and number of individual high-power station components.

Important information before ordering

Screenless model: The AU-510 has no built-in display or integrated Maestro controls. A compatible external client is required.

Maximum RF output: Up to 500W PEP HF and 200W PEP 6m. Antennas, cables and connected equipment must be suitably rated.

Integrated antenna tuner: Matches suitable antennas within the stated 3:1 SWR range.

Power supply: Operates from 80–264V AC. Direct 13.8V DC operation is not supported.

GPSDO: Standard GNSS frequency stabilisation is included; the high-performance GPSDO is optional.

Firmware: Certain features and software clients depend on the installed SmartSDR version and applicable licences.

TECHNICAL DOCUMENTATION

Aurora User Guide

For detailed operating instructions, SmartSDR setup and installation guidance, consult the official FlexRadio Aurora user guide.

View Aurora User Guide →
TECHNICAL SPECIFICATIONS

FlexRadio Aurora AU-510

Screenless 500W HF/200W 6m software-defined transceiver featuring one Spectral Capture Unit, two slice receivers, high-efficiency polar-modulation transmitter, integrated 500W automatic antenna tuner and internal AC power supply.

General Specifications

ModelAurora AU-510
ManufacturerFlexRadio Systems
Transceiver TypeSingle-SCU direct-sampling HF/6m SDR
Receive Coverage30kHz–54MHz
Transmit Bands160m–6m amateur bands, subject to regional configuration
ModesSSB, CW, AM, SAM, FM, RTTY and compatible digital modes
Integrated DisplayNot fitted
Integrated Maestro PanelNot fitted; compatible external Maestro supported
Operating InterfaceCompatible SmartSDR software or external control client
Integrated ATUYes, 3:1 SWR matching range
Integrated Power SupplyYes, 80–264V AC
Dimensions171 × 356 × 337mm (H × W × D), published Aurora chassis dimensions
Approximate Weight8kg class, nominal manufacturer figure

Receiver and SDR Specifications

Spectral Capture Units1
Maximum Slice Receivers2
Maximum Panadapters2 via supported SmartSDR client
ADC Resolution16-bit
ADC Sampling Rate122.88 Msps
Reciprocal Mixing Dynamic Range110dB, published AU-510 figure
Amateur Band Preselectors3rd-order
Full-Duplex RX/TXSupported in compatible configurations
True Diversity ReceptionNot available; requires dual-SCU model
Integrated SO2RNot available; requires dual-SCU model
DAX Audio Channels2
DAX IQ Channels2

Transmitter Specifications

Transmitter TechnologyHigh-efficiency polar modulation
HF Output, 160m–10m1–500W PEP
HF AM Carrier PowerUp to 125W
50MHz Output1–200W PEP
50MHz AM Carrier PowerUp to 50W
Nominal EfficiencyApproximately 80%
Harmonic Suppression60dBc class, manufacturer specification
SmartSignalAdaptive predistortion support, firmware dependent
CESSBControlled Envelope SSB support, firmware dependent

Antenna and Station Interfaces

Main Antenna Connections2, supporting specified high-power operation
Dedicated RX-Only Ports1
Transverter/Exciter Ports1
Transverter IF Range100kHz–54MHz
Transverter DriveAdjustable up to +10dBm
Automatic Antenna TunerIntegrated, high-power, 3:1 SWR matching range
External Frequency Reference10MHz input
Network ConnectionEthernet for SmartSDR/SmartLink connectivity
Integrated HDMI OutputNot fitted; display provided by external operating client

GNSS and Frequency Stability

Integrated GNSS Receiver12-channel
Supported GNSS SystemsGPS, Galileo, GLONASS, QZSS, SBAS
Cold Start TTFFLess than 35 seconds under specified conditions
GNSS-Referenced StabilityApproximately 0.001ppm
Internal TCXO StabilityApproximately 0.5ppm
High-Performance GPSDOOptional upgrade, providing precision 10MHz output

Power Requirements

Input Voltage80–264V AC
Mains Frequency47–63Hz
Power FactorGreater than 0.94 under specified conditions
Receive Power ConsumptionApproximately 35W
Transmit Power ConsumptionApproximately 675W under specified conditions
Direct 13.8V DC OperationNot supported

Software and Remote Operation

Operating PlatformSmartSDR
Integrated DisplayNone
Control RequirementsCompatible external SmartSDR client or Maestro controller
Remote OperatingSmartLink
Multi-Client OperationMultiFlex
Digital Audio Channels2 DAX audio / 2 DAX IQ
Computer ClientsCompatible Windows PC and Mac applications
Mobile ClientsCompatible iPad and iPhone applications
Advanced Software FeaturesSubject to firmware and licence requirements

AU-510 vs AU-520 — Screenless Model Comparison

Both models provide the same integrated 500W HF transmitter, automatic tuner and AC power supply, without a built-in display. The AU-520 adds two-SCU architecture, extra receivers and advanced contesting capabilities.

FeatureAU-510AU-520
HF / 6m PEP500W / 200W500W / 200W
Built-in DisplayNoNo
SCUs12
Slice Receivers24
ADC Sampling122.88 Msps245.76 Msps
Band Preselectors3rd order7th order
RX-Only Ports12
Transverter Ports12
True DiversityNoYes
Integrated SO2RNoYes
Built-in ATU / PSUBoth includedBoth included

Important Operating Notes

Screenless configuration: No integrated display or Maestro front panel. A compatible external operating client is required.

Output: Up to 500W PEP HF and 200W PEP 6m. Use appropriately rated antennas and RF accessories.

ATU: Included, with an intended antenna matching range up to 3:1 SWR.

AC power: 80–264V AC input. Direct 13.8V DC operation is not supported.

GNSS/GPSDO: GNSS is standard; high-performance GPSDO is optional.

Software: Certain features and supported clients may depend on SmartSDR firmware, licensing or software updates.

Aurora User Guide

Consult the official Aurora user guide for installation, software configuration, operating instructions and detailed manufacturer guidance.

View Aurora User Guide →

Delivery Information

Shipping & Delivery

We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.

All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.

Same-Day Despatch

UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.

Weekend Delivery

Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.

Delivery Service Availability

Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.

Returns Information

Returns & Cancellations

To arrange a return, please contact our team at [email protected] or call 0345 2300 599.

Download Returns Form

Changed Your Mind?

Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.

Cancellation Period

14 Days

Notify us of your cancellation within 14 days of receiving your goods.

Once you have notified us, you have a further 14 days to return the goods.

Condition of Returned Goods

Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.

You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.

Important Conditions

Returns Exceptions

The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.

Modified Equipment & Reversal Charges

Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.

ML&S may charge a reasonable fee to reverse physical modifications and restore equipment to its original factory specification. Any applicable charge will be agreed in advance and deducted from your refund.

Custom-Made Cable Assemblies

Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.

Software & Labour Charges

Customer-requested labour and modification charges are non-refundable once the work has been completed.

Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.

Postage Options

Return Postage Charges

Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.

Standard Parcels

Royal Mail Return Label

£5.95

Per parcel

Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.

Larger Parcels

DPD Return Label

£7.95

Per parcel

Suitable for larger or heavier parcels, including shipments containing batteries.

Collection Service

DPD Collection

£25.00

Per parcel

Available upon request for eligible addresses, subject to service availability.

Return Postage Information

All prepaid return charges will be confirmed before booking and deducted from your refund.

The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.

Faulty or Incorrectly Supplied Goods

Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.

DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.

Refund Information

Refunds

How Refunds Are Processed

Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.

Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.

Product Support

Warranty Terms & Conditions

ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.

New Equipment

Minimum 2-Year Warranty

All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.

Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.

Used Equipment

3-Month Warranty

All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.

Warranty Repairs & Exclusions

Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.

Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.

All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.

Overseas Customers

International Returns & Warranty

Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.

International Return Conditions

International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.

ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.

We're Here to Help

Need Help With a Return?

Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.

Email ML&S

Alternatively, call us on 0345 2300 599.

Nothing in these terms excludes or limits your statutory consumer rights.