FlexRadio Aurora AU-520M 500W Dual-SCU HF/6m SDR Transceiver with 8" Touchscreen
SKU Part Number: FLEX-AU-520M
FLEXRADIO AURORA SERIES Aurora AU-520M 500W Dual-SCU HF/6m SDR Transceiver with Integrated 8-inch...
Read More
£9,599.00
Availability: In stock
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
FLEXRADIO AURORA SERIES

Aurora AU-520M

500W Dual-SCU HF/6m SDR Transceiver with Integrated 8-inch Touchscreen

Experience a new generation of high-power software-defined radio. The FlexRadio AU-520M combines a 500W HF transmitter, dual-SCU receiver system, integrated automatic antenna tuner, mains power supply and Maestro-style controls within a single compact transceiver.

500W HF / 200W 6m Dual SCU 4 Slice Receivers 8-inch Touchscreen Built-in ATU + PSU
A COMPLETE HIGH-POWER SDR STATION

500 Watts. One Integrated System.

The Aurora replaces the traditional collection of a transceiver, external amplifier, automatic tuner and high-current power supply with a single high-efficiency platform. Less cabling, less wasted heat and more room to concentrate on operating.

500W

Integrated Transmitter

High-power HF transmission without needing a separate linear amplifier.

3:1

Built-in Antenna Tuner

High-power automatic matching for antennas within its specified SWR range.

AC

Integrated Power Supply

Operates from 80–264V AC without a separate high-current DC supply.

NEXT-GENERATION SDR ENGINEERING

Serious station performance. Remarkably simple integration.

The FlexRadio Aurora AU-520M is a premium HF/6m software-defined transceiver built for demanding DXers, contesters and operators who want high-power capability without the complexity of a traditional multi-box station. It combines an innovative polar-modulation transmitter with FlexRadio's sophisticated direct-sampling SDR receiver architecture.

Two independent Spectral Capture Units (SCUs) support four slice receivers, true diversity reception and integrated SO2R functionality. The result is exceptional flexibility for monitoring different bands, receiving from separate antenna systems and managing complex station workflows.

The AU-520M also features a built-in 8-inch IPS touchscreen and Maestro-style physical controls, allowing comfortable standalone operation. SmartSDR expands those capabilities further with compatible computer, mobile and remote-control clients.

High-power performance, intelligently delivered

500W

HF PEP Output

Adjustable 1–500W PEP on supported 160m–10m amateur bands.

200W

50MHz PEP Output

Up to 200W PEP on 6m, subject to mode and operating limits.

2

Independent SCUs

Two spectral capture paths for sophisticated multi-band and multi-antenna operation.

4

Slice Receivers

Independent frequency and mode selection across four receiver slices.

HIGH-EFFICIENCY POLAR MODULATION

A fundamentally different approach to 500W transmission

Rather than using a traditional linear RF amplifier, Aurora's polar-modulation architecture separates the amplitude and phase components of the transmitted signal. These are processed using efficient switching-mode amplification and sophisticated digital control.

FlexRadio quotes approximately 80% nominal transmitter efficiency, with substantially less power wasted as heat compared with many conventional high-power amplifier arrangements. This enables Aurora to combine considerable RF output with an unusually compact enclosure.

80%

Nominal Efficiency

High-efficiency architecture reduces transmitter power losses.

675W

Specified Transmit Input

Manufacturer-published AC power consumption under stated conditions.

Actual efficiency, consumption and heat output vary with power, mode and operating conditions.

DUAL-SCU RECEIVER ARCHITECTURE

Two independent capture units change what's possible

At the heart of the AU-520M are two independent Spectral Capture Units. Each SCU digitises its own RF input, enabling simultaneous reception from two antenna sources and supporting up to four independently configured slice receivers across the system.

This allows advanced setups that are difficult to achieve with a conventional single-receiver transceiver, including independent band monitoring, diversity reception and sophisticated contest operation.

Four Slice Receivers

Monitor four independently configured frequencies and modes.

True Diversity Reception

Use signals from two suitable receiving antennas to improve reception under appropriate conditions.

Integrated SO2R

Single Operator Two Radio operating workflows in one transceiver, with OTRSP compatibility.

Separate Antenna Sources

Use independent RX paths for flexible band monitoring and low-noise receiving antennas.

DIRECT-SAMPLING SDR PERFORMANCE

A receiver designed for demanding band conditions

The AU-520M combines 16-bit direct sampling at 245.76 Msps with sophisticated digital filtering and seventh-order amateur-band preselectors. These filters provide enhanced rejection of unwanted signals, particularly in demanding multi-band and contest environments.

16-bit

ADC Architecture

High-resolution direct-sampling receiver design.

115dB

RMDR

Published reciprocal mixing dynamic range at 2kHz spacing under specified conditions.

7th

Order Preselectors

Enhanced band filtering for demanding contest environments.

INTEGRATED MAESTRO-STYLE CONTROLS

Modern SDR technology. Familiar front-panel operation.

The AU-520M includes an 8-inch high-resolution IPS touchscreen with dedicated tuning controls and physical buttons. The result is a modern, highly capable SDR that still feels like a conventional high-end transceiver when operated directly from the front panel.

The 1920 × 1200 screen supports two panadapter and waterfall views on the integrated display. A compatible external monitor can also be connected using the available HDMI output.

8-inch IPS Touchscreen

Sharp 1920 × 1200 resolution for spectrum displays and operating controls.

Physical Tuning Controls

Dedicated knobs and buttons for comfortable everyday operation.

Dual Display Views

Two spectrum and waterfall views on the internal display.

Standalone Operation

No separate PC is required for normal front-panel radio operation.

SMARTSDR AND REMOTE OPERATION

Your radio, wherever you want to operate

SmartSDR delivers flexible control of the AU-520M's four slice receivers, operating modes, audio routing and spectrum displays. In addition to the built-in front panel, compatible SmartSDR clients allow operation through a computer, supported mobile devices or an external Maestro controller.

SmartLink supports remote operation over a suitable internet connection, while MultiFlex allows two compatible SmartSDR clients to access the same radio. Digital Audio eXchange (DAX) provides audio and IQ data channels for compatible applications.

SmartLink

Secure remote radio access with the appropriate network configuration.

MultiFlex

Supported shared-radio operation with two compatible software clients.

DAX Audio

Four audio and four IQ data channels for digital-mode software integration.

Flexible Clients

Operate with supported desktop, mobile and Maestro interfaces.

Individual clients may require separate software or licences. Feature availability depends on the installed SmartSDR version.

ANTENNAS AND STATION CONNECTIVITY

Built for complex, high-performance stations

The AU-520M supports two high-power transmitting antenna connections, two dedicated receive-only antenna inputs and two transverter/exciter ports. Together with its dual-SCU receiver system, these interfaces allow flexible station configurations without relying on multiple separate receivers.

Two Main Antenna Ports

Suitable 500W-rated HF antenna connections.

Two RX-Only Ports

Connect dedicated receiving antennas or diversity arrangements.

Two XVTR Ports

Configurable low-level transverter drive up to +10dBm.

Built-in ATU

High-power automatic matching within the specified 3:1 SWR range.

FREQUENCY ACCURACY

Integrated GNSS frequency stabilisation

The Aurora AU-520M includes a multi-system GNSS receiver supporting GPS, Galileo, GLONASS, QZSS and SBAS. With appropriate satellite reception, this helps maintain highly accurate frequency operation without routine manual oscillator adjustment.

FlexRadio specifies frequency stability of approximately 0.001ppm with GNSS and 0.5ppm from the internal TCXO. An optional high-performance GPSDO can also provide a highly stable 10MHz output reference for suitable external equipment.

Optional GPSDO upgrade

Standard GNSS functionality is integrated into the transceiver. The higher-performance GPS-disciplined oscillator is an optional upgrade.

CHOOSING YOUR FLEXRADIO AURORA

AU-520M vs AU-510M: which is right for you?

Both the AU-510M and AU-520M provide the same 500W HF/200W 6m output, integrated high-power antenna tuner, AC power supply, SmartSDR ecosystem and 8-inch Maestro-style touchscreen. The distinction is in the receiver architecture and advanced station capabilities.

Feature AU-510M AU-520M
HF / 6m Output500W / 200W500W / 200W
Integrated Screen8-inch8-inch
SCUs12
Slice Receivers24
Dedicated RX Inputs12
Transverter Ports12
Preselectors3rd order7th order
True DiversityNoYes
Integrated SO2RNoYes
ATU / PSUBoth includedBoth included
THIS MODEL

Choose the AU-520M if...

You want the most capable Aurora receiver platform, true diversity, four slices, advanced contest filtering or integrated SO2R, all with an integrated touchscreen.

ALTERNATIVE MODEL

Choose the AU-510M if...

You want the same integrated display, 500W HF power and high-efficiency Aurora platform, but two slice receivers and a single SCU meet your operating needs.

DIGITAL MODES AND TRANSMITTER PROCESSING

Advanced digital operation and clean transmit audio

The AU-520M supports conventional SSB, CW, AM and FM, together with compatible RTTY and software-based digital modes. SmartSDR's DAX interfaces provide digital audio and IQ routing for supported computer applications.

SmartSignal adaptive predistortion is designed to improve transmitter linearity, while Controlled Envelope SSB (CESSB) can improve the effective speech power under suitable conditions.

High-duty-cycle operating modes

Operators using modes such as FT8 and RTTY should observe FlexRadio's current recommendations for output power, duty cycle and transmitter temperature. Extended continuous-key-down operation should not be assumed to carry the same rating as normal SSB use.

INTEGRATED POWER SUPPLY

High-power operation without a separate PSU

The Aurora's built-in AC power supply operates across an 80–264V AC input range, making it suitable for UK mains operation and compatible international supplies. There is no need for a separate high-current 13.8V DC power supply.

FlexRadio quotes approximately 35W power consumption in receive mode and 675W in transmit mode under its specified operating conditions.

AC input only

The AU-520M cannot be connected directly to a 13.8V battery or DC station power supply. Mobile or portable use requires a properly rated source of AC power.

ENGINEERED FOR SERIOUS AMATEUR RADIO

Equally at home in the shack, contest station or DXpedition

Home Stations

Reduce station clutter with integrated 500W transmit power, tuner and AC supply.

Contesting

Dual SCUs, four slices, band filtering and integrated SO2R capability.

DXpeditions

Transport one integrated high-power station rather than several heavy units.

Remote Operation

SmartLink and SmartSDR offer control from supported remote locations.

Important information before ordering

Transmit power: Up to 500W PEP on supported HF amateur bands and 200W PEP on 50MHz. Antennas, coaxial cables, switches and accessories must be appropriately rated.

Power supply: Integrated 80–264V AC input. Direct 13.8V DC operation is not supported.

Antenna tuner: The internal ATU matches suitable antenna systems within a specified 3:1 SWR range. Any external ATU must be rated for the intended operating power.

GNSS/GPSDO: Integrated GNSS frequency reference is standard. The high-performance GPSDO is optional.

Software: Some features and client capabilities depend on the installed SmartSDR firmware, relevant licences and future software releases.

TECHNICAL DOCUMENTATION

Aurora User Guide

View the official Aurora user guide for detailed operating instructions, system connections, technical guidance and setup information.

View Aurora User Guide →
TECHNICAL SPECIFICATIONS

FlexRadio Aurora AU-520M

500W HF/200W 6m dual-SCU SDR transceiver with four slice receivers, integrated Maestro-style 8-inch touchscreen, polar-modulation transmitter, high-power automatic antenna tuner and internal AC power supply.

General Specifications

ModelAurora AU-520M
ManufacturerFlexRadio Systems
Radio ArchitectureDual-SCU direct-sampling SDR
Amateur Bands160m–6m, regional transmit restrictions apply
Receive Frequency Range30kHz–54MHz
Operating ModesSSB, CW, AM, SAM, FM, RTTY, digital modes
Integrated Front PanelMaestro-style controls with 8-inch touchscreen
Internal Power SupplyWide-range AC
Internal Antenna TunerIncluded, matching up to 3:1 SWR
Dimensions171 × 356 × 337mm (H × W × D)
Approximate Weight8kg class, manufacturer nominal figure

Receiver and SDR Architecture

Spectral Capture Units2 independent SCUs
Maximum Slice Receivers4
Maximum Panadapters4 through supported clients
ADC Resolution16-bit
ADC Sampling Rate245.76 Msps
RMDR at 2kHz110/115dB, manufacturer specification
Receiver Dynamic RangeGreater than 155dB, published maximum zoomed measurement
Band Preselectors7th-order on specified amateur bands
Band-to-Band FilteringContest filtering, greater than 50dB rejection under stated conditions
True Diversity ReceptionSupported
Full-Duplex RX/TXSupported within configured operating limits
Integrated SO2RSupported, with OTRSP integration
DAX Audio Channels4
DAX IQ Channels4

Transmitter Specifications

Transmitter TypeHigh-efficiency polar modulation
HF Output, 160m–10m1–500W PEP
HF AM Carrier OutputUp to 125W
50MHz Output1–200W PEP
50MHz AM CarrierUp to 50W
Nominal Transmitter EfficiencyApproximately 80%
Harmonic SuppressionAt least 60dB below carrier, manufacturer specification
SmartSignalAdaptive predistortion support
CESSBControlled Envelope SSB support
Digital ModesObserve current manufacturer duty-cycle recommendations

Display and Front-Panel Control

Integrated Display8-inch IPS touchscreen
Resolution1920 × 1200 pixels
Front-Panel ControlsIntegrated Maestro-style controls
Internal Panadapter DisplaysUp to 2
Spectrum Bandwidth5kHz–14MHz
Minimum Spectrum Resolution1.46Hz per pixel
External Display PortHDMI
Standalone OperationYes, without a separate PC

Antenna and Station Interfaces

Main Antenna Ports2, suitable for specified 500W output
Dedicated RX-Only Ports2
Transverter/Exciter Ports2
Transverter IF Coverage100kHz–54MHz
Transverter DriveAdjustable to +10dBm
Internal ATU500W-class, 3:1 SWR matching range
External Reference10MHz input
Network ConnectivityEthernet for supported SmartSDR and remote operation

GNSS and Frequency Stability

Integrated GNSS12-channel receiver
Satellite SystemsGPS, Galileo, GLONASS, QZSS, SBAS
Cold Start TTFFLess than 35 seconds under specified conditions
GNSS Frequency StabilityApproximately 0.001ppm
Internal TCXOApproximately 0.5ppm
High-Performance GPSDOOptional upgrade with 10MHz reference output

Power and Installation Requirements

Input Voltage80–264V AC
Mains Frequency47–63Hz
Power FactorGreater than 0.94, specified conditions
Receive Power ConsumptionApproximately 35W
Transmit Power ConsumptionApproximately 675W, specified conditions
Direct 13.8V DC InputNot supported

SmartSDR and Digital Connectivity

Operating PlatformSmartSDR
Included Firmware LicenceCurrent licensed SmartSDR Basic firmware
Remote OperationSmartLink
Multiple ClientsMultiFlex
DAX Audio4 channels
DAX IQ4 channels
Computer Client SupportCompatible PC and Mac software
Mobile Client SupportCompatible iPhone and iPad software

AU-510M vs AU-520M Comparison

Both models feature an 8-inch touchscreen, integrated AC power supply, automatic antenna tuner and identical maximum HF/6m transmit power. The AU-520M adds more independent receiver resources and advanced contesting functionality.

Specification AU-510M AU-520M
HF PEP Output500W500W
6m PEP Output200W200W
Integrated Display8-inch8-inch
SCUs12
Slice Receivers24
ADC Sampling Rate122.88 Msps245.76 Msps
Preselectors3rd order7th order
Receive-Only Ports12
Transverter Ports12
True DiversityNoYes
Integrated SO2RNoYes
Built-in ATU / PSUBothBoth

Important Installation and Operating Notes

Maximum output: 500W PEP HF and 200W PEP 6m. All RF equipment and accessories must be rated for the relevant power and operating duty cycle.

Power input: Wide-range AC mains input only. No direct 13.8V DC connection.

Internal ATU: Intended for suitable antenna systems within its specified matching range. External tuners must be rated for 500W operation where applicable.

GNSS: Standard integrated frequency reference. Optional GPSDO requires a separate upgrade.

Software features: Availability depends on the installed SmartSDR version, included licence and subsequent software updates.

Aurora User Guide

For detailed setup instructions, technical information and operating guidance, consult the official FlexRadio Aurora user guide.

View Aurora User Guide →

Delivery Information

Shipping & Delivery

We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.

All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.

Same-Day Despatch

UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.

Weekend Delivery

Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.

Delivery Service Availability

Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.

Returns Information

Returns & Cancellations

To arrange a return, please contact our team at [email protected] or call 0345 2300 599.

Download Returns Form

Changed Your Mind?

Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.

Cancellation Period

14 Days

Notify us of your cancellation within 14 days of receiving your goods.

Once you have notified us, you have a further 14 days to return the goods.

Condition of Returned Goods

Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.

You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.

Important Conditions

Returns Exceptions

The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.

Modified Equipment & Reversal Charges

Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.

ML&S may charge a reasonable fee to reverse physical modifications and restore equipment to its original factory specification. Any applicable charge will be agreed in advance and deducted from your refund.

Custom-Made Cable Assemblies

Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.

Software & Labour Charges

Customer-requested labour and modification charges are non-refundable once the work has been completed.

Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.

Postage Options

Return Postage Charges

Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.

Standard Parcels

Royal Mail Return Label

£5.95

Per parcel

Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.

Larger Parcels

DPD Return Label

£7.95

Per parcel

Suitable for larger or heavier parcels, including shipments containing batteries.

Collection Service

DPD Collection

£25.00

Per parcel

Available upon request for eligible addresses, subject to service availability.

Return Postage Information

All prepaid return charges will be confirmed before booking and deducted from your refund.

The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.

Faulty or Incorrectly Supplied Goods

Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.

DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.

Refund Information

Refunds

How Refunds Are Processed

Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.

Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.

Product Support

Warranty Terms & Conditions

ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.

New Equipment

Minimum 2-Year Warranty

All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.

Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.

Used Equipment

3-Month Warranty

All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.

Warranty Repairs & Exclusions

Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.

Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.

All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.

Overseas Customers

International Returns & Warranty

Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.

International Return Conditions

International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.

ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.

We're Here to Help

Need Help With a Return?

Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.

Email ML&S

Alternatively, call us on 0345 2300 599.

Nothing in these terms excludes or limits your statutory consumer rights.