Read More

Seen this product cheaper elsewhere?
Call 0345 2300 599Which Control Cable Do I Need?
Select your transceiver and we'll show the matching ML&S control cable for your SPE Expert amplifier.
SPE Expert 2K-FA
A high-power 2kW PEP HF and 6m solid-state linear amplifier with built-in automatic antenna tuner, internal PFC power supply, six-way antenna management, SO2R capability and fully automatic transceiver integration.
2kW with the Power Supply and ATU Built In
The SPE Expert 2K-FA integrates its high-power RF stage, automatic antenna tuner and PFC switching power supply into a single chassis measuring approximately 380 × 183 × 430mm, including connectors.
There is no valve warm-up period. The solid-state amplifier is immediately ready for operation, while two onboard CPUs manage amplifier control, transceiver communication, tuner memories, antenna selection and protection functions.
Six MRF151G Power MOSFETs
The 2K-FA uses six MRF151G power MOSFETs to produce up to 2kW PEP output. The fully solid-state architecture eliminates valve warm-up and provides electronically controlled power management and protection.
The third-series design also improves heat dissipation and raises the permitted FT8 output to as much as 1.5kW, subject to correct installation and operating conditions.
Select the Output to Suit the Station
Change Frequency. The Amplifier Follows.
CAT and band-data integration allows the 2K-FA to follow a compatible transceiver automatically. Frequency changes can trigger the appropriate amplifier band, antenna selection and stored tuner condition without manual intervention.
SPE supports direct integration with Icom, Yaesu, Kenwood, Ten-Tec, FlexRadio and Elecraft, together with suitable configurations for other transceivers.
Amateur Bands from 1.8MHz through 6m
The 2K-FA covers the HF amateur bands including WARC allocations and supports 6m operation. The 60m band is supported where permitted by local regulations and licence conditions.
Match up to 5:1 SWR on HF
The current third-series 2K-FA can match antenna SWR of up to 5:1 on HF at full power and up to 2.5:1 on 6m. This is an improvement over earlier 2K-FA specifications.
Stored antenna and tuner conditions can be changed in approximately 10ms. The ATU can be bypassed where required, with SPE specifying maximum attenuation of 0.8dB.
Up to 14.5dB Gain
The 2K-FA provides up to 14.5dB power gain. With the ALC connection correctly configured, the amplifier can control the required transceiver drive while operating.
When returned to STANDBY, the transceiver can automatically return to its normal output-power setting.
Designed for Low Distortion
SPE specifies spurious emissions below -60dB, improving to -65dB on 50MHz, with third-order distortion of approximately -36dB typical in a two-tone test.
The amplifier presents a nominal 50-ohm input to the transceiver, with input SWR specified at better than 1.2:1.
Built for High-Power SSB, CW and Digital Operation
In MAX mode, SPE specifies unlimited SSB and CW operation under the stated operating conditions. The third-series amplifier also supports up to 1.5kW on FT8.
If a continuous carrier is transmitted in MAX for more than approximately 15 seconds, the amplifier automatically limits output to approximately 1.5kW. MID and LOW modes support unlimited RTTY operation.
Hardware Speed. Software Accuracy.
The 2K-FA continuously monitors heatsink temperature, PA voltage and current, SWR, reflected power, tuner RF voltage, input drive and power-stage balance.
Protection is implemented independently through fast hardware circuitry and software supervision. SPE also controls transmit-relay timing so changeover takes place with zero current at the contacts.
190-255V AC with PFC
The built-in switching power supply operates continuously from 190 to 255V AC, 47-63Hz and incorporates Power Factor Correction. Unlike the smaller Taurus amplifiers, the 2K-FA is not specified for operation from 100-120V mains.
Carry Bag Included
At approximately 25kg the 2K-FA is substantially heavier than the Taurus models, but remains transportable for contest, Field Day and DXpedition use. SPE supplies a sturdy carrying bag with the amplifier.
Expert 2K-FA Rev. 3.0 User Manual
Read the full SPE installation, mains-supply, antenna, CAT-interface, tuner, protection and operating instructions before commissioning the amplifier.
View User ManualSPE Expert 2K-FA
Fully automatic 2kW PEP HF and 6m solid-state linear amplifier with six-MOSFET RF stage, internal switching power supply, automatic antenna tuner and six-way antenna management.
| Amplifier Type | Fully automatic solid-state linear amplifier |
| RF Power Stage | 6 × MRF151G power MOSFETs |
| Frequency Coverage | HF and 6m amateur bands, including WARC bands and 60m where permitted |
| Maximum Output | Up to 2kW PEP SSB/CW |
| FT8 Output | Up to 1.5kW, third-series specification |
| Power Levels | MAX up to 2kW / MID 1kW / LOW 500W |
| Maximum Power Gain | Up to 14.5dB |
| Input Impedance | 50 ohms |
| Input SWR | Better than 1.2:1 |
| RF Inputs | 2 × SO-239 |
| Antenna Outputs | 6 × SO-239 |
| Antennas per Band | Up to 3 |
| SO2R | Supported |
| QSK | Full break-in supported |
| Spurious Emissions | Less than -60dB, approximately -65dB on 50MHz |
| Third-Order Distortion | Approximately -36dB typical, two-tone test |
Automatic Antenna Tuner
| HF Matching Range | Up to 5:1 SWR at full power, third-series specification |
| 6m Matching Range | Up to 2.5:1 SWR |
| Antenna Outputs | 6 programmable SO-239 outputs |
| Antennas per Band | Up to 3 |
| Switching Time | Approx. 10ms for band, antenna and tuning-condition changes |
| Maximum Attenuation | 0.8dB |
| ATU Bypass | Supported |
| MAX Duty | SSB/CW unlimited under specified operating conditions |
| Continuous Carrier Protection | MAX automatically limited to approximately 1.5kW after more than 15 seconds of continuous transmission |
| MID / LOW RTTY | Unlimited, subject to normal operating conditions |
| Cooling | Temperature-managed variable-speed forced-air cooling |
| Power Supply | Internal switching PSU with Power Factor Correction |
| Mains Input | 190-255V AC, 47-63Hz |
| Control Interfaces | CAT, band data, ALC, relay/PTT, USB and RS232 |
| Transceiver Support | Icom, Yaesu, Kenwood, Ten-Tec, FlexRadio, Elecraft and compatible equipment |
| Tunable Antenna Support | SteppIR and Ultrabeam |
| Protection Monitoring | Temperature, PA voltage, PA current, SWR, reflected power, tuner RF voltage, input power and power-stage balance |
| Protection Architecture | Independent hardware and software protection systems |
| Remote Control | USB / RS232; optional LAN-UNIT supported on compatible firmware |
| Dimensions | Approx. 380 × 183 × 430mm, connectors included |
| Approx. Weight | 25kg |
| Included Accessories | Carry bag, 2 × RCA ALC/relay cables, USB cable, DB connectors, spare fuses, air filter and documentation |
| Certifications | CE, FCC, RCM (C-Tick) |
Manufacturer Documentation
Refer to the current Rev. 3.0 SPE manual for complete mains, earthing, CAT configuration, antenna programming, tuner, protection and operating instructions.
View SPE User ManualDelivery Information
Shipping & Delivery
We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.
All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.
Same-Day Despatch
UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.
Weekend Delivery
Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.
Delivery Service Availability
Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.
Returns Information
Returns & Cancellations
To arrange a return, please contact our team at [email protected] or call 0345 2300 599.
Download Returns FormChanged Your Mind?
Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.
Cancellation Period
14 Days
Notify us of your cancellation within 14 days of receiving your goods.
Once you have notified us, you have a further 14 days to return the goods.
Condition of Returned Goods
Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.
You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.
Important Conditions
Returns Exceptions
The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.
Postage Options
Return Postage Charges
Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.
Standard Parcels
Royal Mail Return Label
£5.95
Per parcel
Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.
Larger Parcels
DPD Return Label
£7.95
Per parcel
Suitable for larger or heavier parcels, including shipments containing batteries.
Collection Service
DPD Collection
£25.00
Per parcel
Available upon request for eligible addresses, subject to service availability.
Return Postage Information
All prepaid return charges will be confirmed before booking and deducted from your refund.
The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.
Faulty or Incorrectly Supplied Goods
Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.
DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.
Refund Information
Refunds
How Refunds Are Processed
Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.
Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.
Product Support
Warranty Terms & Conditions
ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.
New Equipment
Minimum 2-Year Warranty
All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.
Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.
Used Equipment
3-Month Warranty
All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.
Warranty Repairs & Exclusions
Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.
Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.
All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.
Overseas Customers
International Returns & Warranty
Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.
International Return Conditions
International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.
ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.
We're Here to Help
Need Help With a Return?
Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.
Email ML&SAlternatively, call us on 0345 2300 599.
Nothing in these terms excludes or limits your statutory consumer rights.









