We use
cookies and similar technologies
to help give you the best experience on our site and to show you relevant advertising. If you continue to use this site, we’ll assume that you’re happy to receive all cookies
SunSDR2 Pro Transceiver
SKU Part Number:
SUNSDR2-PRO
SunSDR2 transceiver - is up-to-date system of the amateur radio communication in the HF and VHF frequency bands with the digital signal processing....
Read More
Read More
£1,450.00
£1,208.33
Pre Order
Seen this product cheaper elsewhere?
Call 0345 2300 599
SunSDR2 transceiver - is up-to-date system of the amateur radio communication in the HF and VHF frequency bands with the digital signal processing. This device is designed to work with the PC via Ethernet (LAN) or via WiFi. Receive path is based on the direct conversion principle, transmission path – over the direct synthesis principle.
Main capabilities
· Separate independent receive path based on Direct Down Conversion principle (DDC)
· Separate independent transmitter, based on the Direct Up Conversion principle (DUC)
· Full or half-duplex mode *
· Antenna switch for 2 antennas in HF
· Built-in power-meter and SWR-meter in HF band
· External control connector for other devices, 10 powerful keys with open collector
· ALC connector for external power amplifiers
· Input connector for connecting PTT footswitch
· Input connector for connecting CW-key
· Output Jack for headphones, impedance 8-10000 Ohm
· Microphone input Jack for electret microphone
· Microphone connector with PTT switch Yaesu MH-31,which contains microphone, PTT button and 3 additional functional buttons
· Protection from polairty reversal
· Ethernet LAN interface provides galvanic isolation between transceiver and PC
· Transceiver's calibrations are kept inside the device. No need for primary calibration
· Possibility of remote work. PTT footswitch and CW-key are connected to the E-Coder panel, microphone – to the PC
* Full duplex mode is supported by the transceiver's hardware, but is not software implemented. This mode will be supported in the future ExpertSDR2 software versions.
Application field
· Radio Amateur HF/VHF transceiver
· Remote reception point for contests
· SO2R/SO2V working contest-station
· Spectrum analyzer with the spectrum scope up to 80MHz
· Record air stations with the further reproducing
PC requirements
· Processor Intel Core i3 and higher
· Video card supporting the technology of OpenGL 1.5 and higher and RAM 256 Mbyte and more
· Local network connector 100 Mbps or 1 Gbps
· OS Windows XP/7/8 x32 or x64, OS Linux Ubuntu x64
Software
ExpertSDR2 program is used to support SunSDR2 transceiver. At the present moment software works in the receiving mode and maintains two independent channels with the bands up to 312 kHz. DSP library, developed by the company Expert Electronics, allowed to improve the receipt quality and higher the software reliability. Two OS are supported: Windows 8 and Linux Ubuntu.
Receiver's block diagram
Transceiver SunSDR2 configuration
Transceiver can have additional option WiFi unit for work in wireless networks. In accordance with it at the rear panel can be either set or not WA connectors and the delivery set is changed.
Basic configuration:
· Transceiver SunSDR2. At the rear panel of the basic model there is no SMA connector for WiFi antenna
· LAN-cable for connecting to local network
· Power cable for connecting the transceiver to power supply
· Two audio-adapters JACK 6.3mm to JACK 3.5mm for connecting PC's headset to transceiver
· CD-disk with software (Software can be also downloaded from our web-site)
Maximum configuration:
· Transceiver SunSDR2. At the rear panel of the model is set SMA connector for WiFi antenna
· LAN-cable for connecting to local network
· Small-size WiFi antenna
· Power cable for connecting the transceiver to power supply
· Two audio-adapters JACK 6.3mm to JACK 3.5mm for connecting PC's headset to transceiver
· CD-disk with software (Software can be also downloaded from our web-site)
Additional configuration:
In addition to the basic transceiver's configuration can be purchased the following devices:
· Switched power supply for voltage 15 V current 5A
· PC's headset with electret microphone
· SDR control panel E-Coder or E-Coder Mini kit for remote comfortable work
****Wifi version not available at this time****
CLICK HERE TO GET THE SunSDR SOFTWARE
CLICK HERE TO GET THE SunSDR SOFTWARE INSTRUCTIONS
CLICK HERE TO GET THE SunSDR QUICK START GUIDE
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]