Read More
Seen this product cheaper elsewhere?
Call 0345 2300 599
Yaesu FTM-150 ASP - 55/50W 144/430MHz FM Dual Band Mobile Transceiver
Yaesu FTM-310DE - 144/430MHz 55W/50W C4FM Digital/ FM Mobile Transceiver w/ ASP
Armoloq TPA-150 for Yaesu FTM-150 / FTM-310
Two-piece aluminium protective mounting platform supplied with the required SLO spacers and PL-TNC/RA3 RF Plug-and-Play package.
This package includes the protective mounting platform, two required SLO aluminium spacers, mounting hardware and the complete PL-TNC/RA3 RF connection package listed below.
Radio, MBS-1280 battery system, battery and other accessories are not included unless specifically stated in the package contents below.
The Armoloq TPA-150 is a protective mounting platform designed for the Yaesu FTM-150 and FTM-310 mobile transceivers.
Its two-piece wrap-around design helps protect both the radio body and control head while retaining access to the radio's controls. The TPA is manufactured from 1/8 inch 5052 aluminium and finished in a durable matte black powder coat.
Because of the oversized control head, the TPA-150 uses two specially machined SLO aluminium spacers between the radio and mounting platform. These spacers are included and are required for correct installation.
Compatible with Yaesu FTM-150R/E and FTM-310DR/DE transceivers.
1/8 inch aluminium construction with a matte black powder-coated finish.
Two machined 6061 aluminium spacers provide the required offset for the oversized control head.
Includes the RF jumper, TNC bulkhead connector and TNC to BNC adaptor.
Built Around the FTM-150 and FTM-310
The TPA-150 uses a two-piece wrap-around design to provide additional protection around the radio body and control head while maintaining access to the controls.
It is also compatible with the optional Armoloq MBS-1280 battery system, allowing the TPA-150 to form part of a larger portable radio configuration when required.
TPA SLO Aluminium Spacers
The supplied SLO spacers offset the protective platform correctly from the oversized control head. The TPA-150 must not be installed directly against the radio without them.
Full illustrated fitting instructions are included in the Product Information section below.
PL-TNC/RA3 Plug-and-Play Package
The included PL-TNC/RA3 package provides a convenient RF connection through the Armoloq platform, giving the installed radio a neat and accessible external antenna connection.
It includes a PL-259 right-angle to TNC male lead terminated with 1ft of RG58C/U, a TNC female bulkhead connector and a TNC male to BNC female adaptor.
TPA Frame, SLO Spacers and RF Package
- 1 x Armoloq TPA-150 protective mounting platform
- 2 x TPA SLO aluminium spacers
- 8 x M2.6-0.45 x 8mm socket-head screws
- 4 x M4-0.7 x 10mm socket-head screws
- 1 x PL-259 right-angle to TNC male RG58C/U coaxial lead, 1ft
- 1 x TNC female bulkhead connector
- 1 x TNC male to BNC female adaptor
TPA-150 Specifications
Armoloq TPA-150 with PL-TNC/RA3
Pack Frame Specifications
PL-TNC/RA3 Package
Supplied Components
- 1 x TPA-150 protective mounting platform
- 2 x TPA SLO aluminium spacers
- 8 x M2.6-0.45 x 8mm socket-head screws
- 4 x M4-0.7 x 10mm socket-head screws
- 1 x PL-259 right-angle to TNC male RG58C/U coaxial lead, 1ft
- 1 x TNC female bulkhead connector
- 1 x TNC male to BNC female adaptor
Fitting the TPA-150
The supplied SLO spacers must be installed between the radio and the TPA frame. Follow the sequence below using the supplied mounting hardware.
Identify the SLO Spacers
Locate the two machined SLO aluminium spacers and the supplied M2.6-0.45 x 8mm socket-head screws. Each spacer is marked L or R for the appropriate side of the radio.
Fit the Spacers to the Radio
Secure each SLO spacer to the appropriate side of the radio using the supplied M2.6-0.45 x 8mm socket-head screws.
With the control panel facing the operator, install each spacer with its L or R marking facing the radio body.
Position the TPA Frame
Position the two protective frame sections on either side of the radio and align the frame mounting points with the installed SLO spacers.
Secure the Protective Frame
Attach the TPA frame to the SLO spacers using the supplied M4-0.7 x 10mm socket-head screws. Check that both sides are seated correctly and that the frame is secure before use.
The SLO spacers are required for correct installation. Do not mount the TPA frame directly against the radio. The supplied M2.6-0.45 x 8mm screws are specifically sized for use with the spacers and must not be installed without them.
Radio, MBS-1280 battery system, battery and other accessories are not supplied unless specifically listed in the package contents.
Shipping:
We have several shipping options for our products, including next-day and Saturday/Sunday delivery for certain items. Please see these options at checkout.
Returns:
If you have any equipment that needs to be returned to Martin Lynch & Sons, please fill out the form below:
Upon receipt of goods you have 14 days to return goods however the goods must be returned in original packaging and care must have been taken with the goods you wish to return. Under distance selling regulations you are not entitled to any refund on carriage charges or modification charges made at your request. Large items cannot be returned if they have been assembled, unless faulty.
Warranty Terms and Conditions
Outside of the 14 faulty return period, returned items cannot be accepted, unless covered by manufacturer's warranty. We will repair as much as possible on site however in exceptional circumstances products may have to be returned to the manufacturer of distributor.
For repairs/replacements under manufacturer’s warranty for any item please download a ML&S return form from the link above and return to ML&S with the faulty product.
International Warranty information
Warranty service for items we sell is available in the U.K. only, unless otherwise noted. It is your responsibility to pay freight for returned items to the U.K. and back to you for desired warranty coverage. All of our NEW products come with a minimum 12 month warranty, (Yaesu & Icom 24 months), with up to 90 days on second-hand equipment. Items returned for service must state "returned goods for repair" on the return air waybill or U.K. import customs duties apply and will be added to your invoice. For more info about returning items please contact our customer help desk, [email protected]