Read More

Seen this product cheaper elsewhere?
Call 0345 2300 599Which Control Cable Do I Need?
Select your transceiver and we'll show the matching ML&S control cable for your SPE Expert amplifier.
SPE Expert 1.5K-FA Taurus
A remarkably compact 1.5kW HF and 6m solid-state linear amplifier combining dual high-dissipation RF devices, a built-in automatic antenna tuner, internal PFC power supply, SO2R capability and fully automatic transceiver integration in a chassis weighing only around 9.5kg.
1,500W in an Exceptionally Compact Package
The SPE Expert 1.5K-FA Taurus combines its RF power stage, switching power supply and high-power automatic antenna tuner in a chassis measuring approximately 280 × 120 × 380mm, including connectors.
There is no valve warm-up period. Once enabled, the amplifier is immediately ready for operation and can automatically follow a suitably connected transceiver as frequency and band are changed.
Two 1.8kW-Dissipation Devices
The Taurus uses a dual-device solid-state RF stage, with each power device specified for 1.8kW dissipation. SPE designed this architecture to provide the thermal and electrical headroom required for its 1.5kW output while maintaining robustness, efficiency and linearity.
Improved heat dissipation and control software are particularly important during demanding digital-mode operation, where sustained RF loading places considerably greater thermal demands on an amplifier than normal voice operation.
Use Only the Power You Need
Turn the Radio. The Amplifier Follows.
CAT and band-data integration allows the 1.5K-FA Taurus to follow compatible transceivers automatically. Change frequency and the amplifier can select the appropriate band, recall stored tuner settings and manage the programmed antenna configuration.
SPE provides integration for transceivers from Icom, Yaesu, Kenwood, Ten-Tec, FlexRadio and Elecraft, while additional configurations can be used with other equipment.
1.8MHz to 50MHz
The amplifier covers the amateur bands from 1.8MHz through 50MHz, including the WARC bands, with operation on 5MHz / 60m where permitted.
Match up to 5:1 SWR at Full Power
The integrated ATU can match antenna SWR of up to 5:1 on HF and 2.5:1 on 6m. Previously established tuning conditions are stored so the appropriate match can be recalled automatically as the operating frequency changes.
Band, antenna and tuner conditions can be changed in approximately 10ms. The ATU can also be bypassed where required, with SPE specifying maximum pass-through attenuation of 0.8dB.
Up to 15dB Gain
The 1.5K-FA Taurus provides up to 15dB power gain. With a correctly configured ALC connection, the required transceiver drive can be managed automatically while the amplifier is in OPERATE.
When the amplifier is returned to STANDBY, the exciter can automatically return to its normal full-power setting.
Designed for High Linearity
SPE specifies third-order distortion in a two-tone test from -32dB to -38dB, with -35dB typical.
The amplifier is designed for a 50-ohm input and SPE specifies input SWR as better than 1.2:1, helping present the connected transceiver with a consistent load.
Constantly Monitoring the Amplifier
Temperature, voltage, current, reflected power, output power, SWR and maximum RF voltage within the tuner are continuously monitored.
SPE combines fast hardware protection with software monitoring for accuracy. Relay timing is controlled so switching takes place with zero current across the contacts, helping prevent hot switching, while additional protection is provided against the initial transceiver power spike.
Automatic MAX to MID Reduction in FM
During FM operation, the current SPE firmware automatically changes from MAX to MID if a continuous transmission in MAX exceeds approximately one minute, reducing thermal loading during prolonged carrier operation.
100-255V AC with PFC
The internal switching power supply operates from 100 to 255V AC, 47-63Hz and incorporates Power Factor Correction.
SPE notes that operation from 100-120V supplies may result in slightly reduced maximum output power.
1.5kW at Approximately 9.5kg
Despite its 1.5kW output, integrated PSU and automatic tuner, the Taurus weighs approximately 9.5kg. SPE supplies a sturdy carrying bag for portable operation, Field Day use and DXpeditions.
Expert 1.5K-FA Taurus User Manual
Read the full SPE installation, programming, CAT-interface, antenna-tuner and operating instructions before commissioning the amplifier.
View User ManualSPE Expert 1.5K-FA Taurus
Fully automatic 1.5kW dual-LDMOS HF and 6m solid-state linear amplifier with integrated automatic antenna tuner and universal switching power supply.
| Amplifier Type | Fully automatic solid-state linear amplifier |
| RF Power Stage | Dual LDMOS / dual MOSFET architecture, 1.8kW dissipation per device |
| Frequency Coverage | 1.8MHz to 50MHz including WARC bands; 5MHz / 60m where permitted |
| Maximum Output | 1.5kW |
| HF Output Regulation | 1.5kW, ±0.5dB |
| 50MHz Output Regulation | 1.5kW, ±0.8dB |
| Power Levels | MAX 1,500W / MID 1,000W / LOW 500W |
| Power Gain | Up to 15dB |
| Input Impedance | 50 ohms |
| Input SWR | Better than 1.2:1 |
| RF Inputs | 2 × SO-239 |
| Antenna Outputs | 4 × SO-239 |
| SO2R | Supported |
| QSK | Full break-in supported |
| Third-Order Distortion | -32dB to -38dB, -35dB typical, two-tone test |
Automatic Antenna Tuner
| HF Matching Range | Up to 5:1 SWR |
| 6m Matching Range | Up to 2.5:1 SWR |
| Antenna Memory | Up to 2 programmed antennas per band |
| Switching Time | Approx. 10ms for band, antenna and tuning-condition changes |
| Maximum Attenuation | 0.8dB |
| ATU Bypass | Supported |
| Operating Duty | Full ICAS in SSB, CW, FT8 and JT65 |
| FM Protection | Automatically changes from MAX to MID after approximately 1 minute of continuous FM transmission in MAX |
| Cooling | Temperature-managed variable-speed forced-air cooling |
| Power Supply | Internal switching PSU with Power Factor Correction |
| Mains Input | 100-255V AC, 47-63Hz |
| Low-Voltage Mains Note | Operation at 100-120V AC may slightly reduce maximum output |
| Control Interfaces | CAT, band data, ALC, PTT/relay, USB and RS232 |
| Transceiver Support | Icom, Yaesu, Kenwood, Ten-Tec, FlexRadio, Elecraft and other compatible equipment |
| Tunable Antenna Support | SteppIR and Ultrabeam control supported |
| Monitored Parameters | Output power, reflected power, SWR, voltage, current, temperature and tuner RF voltage |
| Protection | Independent hardware and software monitoring, controlled relay switching and first-spike protection |
| Dimensions | 280 × 120 × 380mm, including connectors |
| Approx. Weight | 9.5kg |
| Included Carrying Equipment | Heavy-duty carry bag |
| Certifications | CE, FCC, RCM (C-Tick) |
Manufacturer Documentation
Refer to the current SPE manual for complete installation, earthing, CAT configuration, antenna programming, protection and operating instructions.
View SPE User ManualDelivery Information
Shipping & Delivery
We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.
All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.
Same-Day Despatch
UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.
Weekend Delivery
Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.
Delivery Service Availability
Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.
Returns Information
Returns & Cancellations
To arrange a return, please contact our team at [email protected] or call 0345 2300 599.
Download Returns FormChanged Your Mind?
Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.
Cancellation Period
14 Days
Notify us of your cancellation within 14 days of receiving your goods.
Once you have notified us, you have a further 14 days to return the goods.
Condition of Returned Goods
Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.
You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.
Important Conditions
Returns Exceptions
The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.
Postage Options
Return Postage Charges
Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.
Standard Parcels
Royal Mail Return Label
£5.95
Per parcel
Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.
Larger Parcels
DPD Return Label
£7.95
Per parcel
Suitable for larger or heavier parcels, including shipments containing batteries.
Collection Service
DPD Collection
£25.00
Per parcel
Available upon request for eligible addresses, subject to service availability.
Return Postage Information
All prepaid return charges will be confirmed before booking and deducted from your refund.
The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.
Faulty or Incorrectly Supplied Goods
Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.
DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.
Refund Information
Refunds
How Refunds Are Processed
Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.
Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.
Product Support
Warranty Terms & Conditions
ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.
New Equipment
Minimum 2-Year Warranty
All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.
Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.
Used Equipment
3-Month Warranty
All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.
Warranty Repairs & Exclusions
Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.
Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.
All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.
Overseas Customers
International Returns & Warranty
Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.
International Return Conditions
International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.
ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.
We're Here to Help
Need Help With a Return?
Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.
Email ML&SAlternatively, call us on 0345 2300 599.
Nothing in these terms excludes or limits your statutory consumer rights.










