SPE Expert 1.5K-FA Taurus 1.5kW Solid-State Linear Amplifier with ATU
SKU Part Number: 1.5K-FA-TAURUS
SPE Cable Finder Which Control Cable Do I Need? ...
Read More
£5,185.00
NEW Stock Arriving: Late May 2026
call

Seen this product cheaper elsewhere?

Call 0345 2300 599
SPE Cable Finder

Which Control Cable Do I Need?

Select your transceiver and we'll show the matching ML&S control cable for your SPE Expert amplifier.

Can't find your radio? Try our Cable & Compatibility Finder to find the correct amplifier control cable for your station.
1.5kW Dual-LDMOS Fully Automatic Amplifier

SPE Expert 1.5K-FA Taurus

A remarkably compact 1.5kW HF and 6m solid-state linear amplifier combining dual high-dissipation RF devices, a built-in automatic antenna tuner, internal PFC power supply, SO2R capability and fully automatic transceiver integration in a chassis weighing only around 9.5kg.

MAX OUTPUT
1,500W
Full-power MAX mode across HF and 50MHz.
RF STAGE
Dual LDMOS
Two devices rated for 1.8kW dissipation each.
ATU
Up to 5:1 SWR
Automatic matching on HF, up to 2.5:1 on 6m.
WEIGHT
Approx. 9.5kg
Exceptionally compact for a 1.5kW mains-powered amplifier with ATU.
1.5kW Taurus Performance

1,500W in an Exceptionally Compact Package

The SPE Expert 1.5K-FA Taurus combines its RF power stage, switching power supply and high-power automatic antenna tuner in a chassis measuring approximately 280 × 120 × 380mm, including connectors.

There is no valve warm-up period. Once enabled, the amplifier is immediately ready for operation and can automatically follow a suitably connected transceiver as frequency and band are changed.

Dual RF Power Stage

Two 1.8kW-Dissipation Devices

The Taurus uses a dual-device solid-state RF stage, with each power device specified for 1.8kW dissipation. SPE designed this architecture to provide the thermal and electrical headroom required for its 1.5kW output while maintaining robustness, efficiency and linearity.

Improved heat dissipation and control software are particularly important during demanding digital-mode operation, where sustained RF loading places considerably greater thermal demands on an amplifier than normal voice operation.

Three Selectable Power Levels

Use Only the Power You Need

MAX
1,500W
Full amplifier output for maximum-power operation.
MID
1,000W
Intermediate power for stations where 1.5kW is not required.
LOW
500W
Reduced output for lower-power operation and additional flexibility.
Fully Automatic

Turn the Radio. The Amplifier Follows.

CAT and band-data integration allows the 1.5K-FA Taurus to follow compatible transceivers automatically. Change frequency and the amplifier can select the appropriate band, recall stored tuner settings and manage the programmed antenna configuration.

SPE provides integration for transceivers from Icom, Yaesu, Kenwood, Ten-Tec, FlexRadio and Elecraft, while additional configurations can be used with other equipment.

HF + 6m Coverage

1.8MHz to 50MHz

The amplifier covers the amateur bands from 1.8MHz through 50MHz, including the WARC bands, with operation on 5MHz / 60m where permitted.

Built-In Automatic Antenna Tuner

Match up to 5:1 SWR at Full Power

The integrated ATU can match antenna SWR of up to 5:1 on HF and 2.5:1 on 6m. Previously established tuning conditions are stored so the appropriate match can be recalled automatically as the operating frequency changes.

Band, antenna and tuner conditions can be changed in approximately 10ms. The ATU can also be bypassed where required, with SPE specifying maximum pass-through attenuation of 0.8dB.

4 ANTENNAS
Automatic Selection
Four SO-239 antenna outputs can be programmed and controlled automatically.
SO2R
Two RF Inputs
Two SO-239 transceiver inputs support Single Operator Two Radio configurations.
2 PER BAND
Flexible Antenna Choice
Up to two antenna choices can be programmed for each amateur band.
TUNABLE ANTENNAS
SteppIR / Ultrabeam
Compatible dynamically tuned antenna systems can be managed directly by the amplifier.
High Power Gain

Up to 15dB Gain

The 1.5K-FA Taurus provides up to 15dB power gain. With a correctly configured ALC connection, the required transceiver drive can be managed automatically while the amplifier is in OPERATE.

When the amplifier is returned to STANDBY, the exciter can automatically return to its normal full-power setting.

Clean RF Output

Designed for High Linearity

SPE specifies third-order distortion in a two-tone test from -32dB to -38dB, with -35dB typical.

The amplifier is designed for a 50-ohm input and SPE specifies input SWR as better than 1.2:1, helping present the connected transceiver with a consistent load.

Hardware + Software Protection

Constantly Monitoring the Amplifier

Temperature, voltage, current, reflected power, output power, SWR and maximum RF voltage within the tuner are continuously monitored.

SPE combines fast hardware protection with software monitoring for accuracy. Relay timing is controlled so switching takes place with zero current across the contacts, helping prevent hot switching, while additional protection is provided against the initial transceiver power spike.

QSK
Full Break-In
Full break-in operation is supported for operators requiring rapid CW transmit and receive switching.
DIGITAL MODES
Full ICAS
SPE specifies full ICAS operation in SSB, CW, FT8 and JT65.
COOLING
Variable Fan Control
Cooling fan speed is managed continuously according to amplifier thermal requirements.
Continuous Carrier Protection

Automatic MAX to MID Reduction in FM

During FM operation, the current SPE firmware automatically changes from MAX to MID if a continuous transmission in MAX exceeds approximately one minute, reducing thermal loading during prolonged carrier operation.

Universal Internal Power Supply

100-255V AC with PFC

The internal switching power supply operates from 100 to 255V AC, 47-63Hz and incorporates Power Factor Correction.

SPE notes that operation from 100-120V supplies may result in slightly reduced maximum output power.

REMOTE CONTROL
USB / RS232
Remote operation and firmware updating are supported through the amplifier's control interfaces.
LCD DISPLAY
Detailed Live Information
Monitor PEP output, voltage, current, temperature, SWR, tuner status, input, CAT configuration, band and alarms.
REMOTE POWER
Radio-Controlled ON/OFF
A suitable transceiver connection can switch the amplifier on and off together with the exciter.
Built to Travel

1.5kW at Approximately 9.5kg

Despite its 1.5kW output, integrated PSU and automatic tuner, the Taurus weighs approximately 9.5kg. SPE supplies a sturdy carrying bag for portable operation, Field Day use and DXpeditions.

Documentation

Expert 1.5K-FA Taurus User Manual

Read the full SPE installation, programming, CAT-interface, antenna-tuner and operating instructions before commissioning the amplifier.

View User Manual
Technical Specification

SPE Expert 1.5K-FA Taurus

Fully automatic 1.5kW dual-LDMOS HF and 6m solid-state linear amplifier with integrated automatic antenna tuner and universal switching power supply.

Amplifier Type Fully automatic solid-state linear amplifier
RF Power Stage Dual LDMOS / dual MOSFET architecture, 1.8kW dissipation per device
Frequency Coverage 1.8MHz to 50MHz including WARC bands; 5MHz / 60m where permitted
Maximum Output 1.5kW
HF Output Regulation 1.5kW, ±0.5dB
50MHz Output Regulation 1.5kW, ±0.8dB
Power Levels MAX 1,500W / MID 1,000W / LOW 500W
Power Gain Up to 15dB
Input Impedance 50 ohms
Input SWR Better than 1.2:1
RF Inputs 2 × SO-239
Antenna Outputs 4 × SO-239
SO2R Supported
QSK Full break-in supported
Third-Order Distortion -32dB to -38dB, -35dB typical, two-tone test

Automatic Antenna Tuner

HF Matching Range Up to 5:1 SWR
6m Matching Range Up to 2.5:1 SWR
Antenna Memory Up to 2 programmed antennas per band
Switching Time Approx. 10ms for band, antenna and tuning-condition changes
Maximum Attenuation 0.8dB
ATU Bypass Supported
Operating Duty Full ICAS in SSB, CW, FT8 and JT65
FM Protection Automatically changes from MAX to MID after approximately 1 minute of continuous FM transmission in MAX
Cooling Temperature-managed variable-speed forced-air cooling
Power Supply Internal switching PSU with Power Factor Correction
Mains Input 100-255V AC, 47-63Hz
Low-Voltage Mains Note Operation at 100-120V AC may slightly reduce maximum output
Control Interfaces CAT, band data, ALC, PTT/relay, USB and RS232
Transceiver Support Icom, Yaesu, Kenwood, Ten-Tec, FlexRadio, Elecraft and other compatible equipment
Tunable Antenna Support SteppIR and Ultrabeam control supported
Monitored Parameters Output power, reflected power, SWR, voltage, current, temperature and tuner RF voltage
Protection Independent hardware and software monitoring, controlled relay switching and first-spike protection
Dimensions 280 × 120 × 380mm, including connectors
Approx. Weight 9.5kg
Included Carrying Equipment Heavy-duty carry bag
Certifications CE, FCC, RCM (C-Tick)

Manufacturer Documentation

Refer to the current SPE manual for complete installation, earthing, CAT configuration, antenna programming, protection and operating instructions.

View SPE User Manual

Delivery Information

Shipping & Delivery

We offer a range of UK and international delivery services, including next working day delivery and selected weekend options for eligible orders. Available services, prices and estimated delivery times are shown at checkout.

All orders are despatched within 24 hours. UK domestic orders placed before 2pm are despatched the same day, provided no modification or labour service has been purchased.

Same-Day Despatch

UK domestic orders placed before 2pm are despatched the same day, excluding orders requiring modification or labour services.

Weekend Delivery

Orders requiring weekend delivery must be placed before 2pm on Friday. Orders placed on Saturday are not eligible for next-day or Sunday delivery, even if Sunday Delivery is selected at checkout.

Delivery Service Availability

Delivery options depend on the size, weight, contents and destination of your parcel. Express and weekend services are subject to availability and applicable cut-off times. Oversized or exceptionally heavy items may require a specialist delivery quotation.

Returns Information

Returns & Cancellations

To arrange a return, please contact our team at [email protected] or call 0345 2300 599.

Download Returns Form

Changed Your Mind?

Under the Consumer Contracts Regulations 2013, most purchases made online or by telephone can be cancelled within 14 days of receipt.

Cancellation Period

14 Days

Notify us of your cancellation within 14 days of receiving your goods.

Once you have notified us, you have a further 14 days to return the goods.

Condition of Returned Goods

Please handle all goods with care. Returned items must be in a resaleable condition, complete with their original packaging and all supplied accessories.

You may inspect goods as you would in a shop. However, handling beyond what is necessary for inspection may result in a lawful deduction from your refund to reflect any diminished value.

Important Conditions

Returns Exceptions

The following conditions apply to modified equipment, custom-made cable assemblies, software and labour services.

Modified Equipment & Reversal Charges

Additional return conditions may apply to equipment modified at the customer's request, including wideband transmit or receive modifications.

ML&S may charge a reasonable fee to reverse physical modifications and restore equipment to its original factory specification. Any applicable charge will be agreed in advance and deducted from your refund.

Custom-Made Cable Assemblies

Coaxial cable assemblies manufactured to a customer's specifications are excluded from the 14-day return policy and are non-refundable unless faulty.

Software & Labour Charges

Customer-requested labour and modification charges are non-refundable once the work has been completed.

Computer software may only be returned under the 14-day return policy if it remains sealed and unopened.

Postage Options

Return Postage Charges

Customers are responsible for the direct cost of returning unwanted or incorrectly ordered goods. You may arrange your own suitable return postage or choose one of our optional prepaid return services.

Standard Parcels

Royal Mail Return Label

£5.95

Per parcel

Suitable for eligible standard-sized parcels, subject to Royal Mail restrictions. Free collection is available.

Larger Parcels

DPD Return Label

£7.95

Per parcel

Suitable for larger or heavier parcels, including shipments containing batteries.

Collection Service

DPD Collection

£25.00

Per parcel

Available upon request for eligible addresses, subject to service availability.

Return Postage Information

All prepaid return charges will be confirmed before booking and deducted from your refund.

The prices above apply to eligible UK mainland returns. Oversized items, specialist products and returns from other destinations may require a separate quotation. Estimated return costs will be disclosed before purchase.

Faulty or Incorrectly Supplied Goods

Return postage charges do not apply to faulty, damaged or incorrectly supplied goods returned under statutory rights. In these circumstances, ML&S will arrange a free return using either the Royal Mail or DPD return label service described above.

DPD collection is an additional chargeable service and is not provided free of charge under your statutory rights.

Refund Information

Refunds

How Refunds Are Processed

Refunds are processed without undue delay following receipt and inspection of the returned goods, and no later than 14 days after we receive your returned parcel.

Refunds are issued to the original payment method. Any prepaid return postage charges or lawful deductions for diminished value will be itemised and provided upon request.

Product Support

Warranty Terms & Conditions

ML&S provides warranty cover on new and used equipment, subject to the conditions outlined below.

New Equipment

Minimum 2-Year Warranty

All new products supplied by ML&S include a minimum two-year warranty against manufacturing defects. Batteries are excluded and are covered by separate warranty terms.

Some manufacturers offer extended warranty cover, including a three-year warranty on eligible Yaesu equipment. Any additional cover is subject to the manufacturer's terms and conditions.

Used Equipment

3-Month Warranty

All used products supplied by ML&S include a three-month parts and labour warranty against manufacturing defects. Batteries are excluded from warranty cover.

Warranty Repairs & Exclusions

Our workshop may assess and repair faulty equipment on site or, where necessary, refer it to the manufacturer or an authorised service centre.

Warranty exclusions may include batteries, normal wear and tear, accidental damage, misuse and unauthorised modifications, as specified in the applicable warranty terms.

All warranties are provided in addition to your statutory consumer rights against ML&S, which are not limited by the warranty period.

Overseas Customers

International Returns & Warranty

Unless otherwise stated, ML&S warranty servicing is carried out in the United Kingdom. International customers must contact us before returning goods to confirm the appropriate shipping and customs requirements.

International Return Conditions

International customers are responsible for return postage unless the goods are faulty and ML&S has been notified within a reasonable time.

ML&S accepts no responsibility for additional charges arising from incorrectly completed customs documentation. Any additional duties charged to ML&S as a result will be billed to the customer before the goods are returned.

We're Here to Help

Need Help With a Return?

Our team can assist with returns, postage arrangements, equipment modifications and warranty claims.

Email ML&S

Alternatively, call us on 0345 2300 599.

Nothing in these terms excludes or limits your statutory consumer rights.